31 Yes None 1 1000000 Name... /precisionsolutions/machinecontrol/ Machine Control Machine Control 3D X53i
Unlike laser excavator systems, X-53i enables the operator to “see” his machine’s exact position in relation to the site, enabling precise positioning over utility centerlines. In real time the operator can also see the position of the teeth of the bucket compared to the finish design which is very helpful in deep cuts, blind excavations or when working around structures. Features & Benefits :
Images
Milling 2D
The industry-standard for elevation and slope control for asphalt milling patented Sonic Averaging System (SAS) provides smoother results offsets allow for any chosen mill depth durable components, time-tested system delivers ultimate reliability. Features & Benefits:
Images
Milling 3D
Topcon’s Millimeter GPS System is the World’s First GPS based millimeter accurate control for milling machines. Topcon’s revolutionary Lazer Zone™ technology based, Millimeter GPS uses GPS positioning together with a zone laser reference to give you unparalleled freedom and productivity. Topcon’s Millimeter GPS Milling has the simplicity of a laser, accuracy of a robotic total station, and multiple user capabilities of GPS. Features & Benefits:
Images
Motor Grader – 3D-MC2
Topcon revolutionized the 3D grading world with the introduction of 3D-MC2 for Dozers. This innovative new technology brought operating speeds and accuracies to crawler dozers that no one had seen before. Now, the same 3D-MC2 System is available for motor graders. Features & Benefits:
Images
Motor Grader 2D
Topcon’s 2D laser control set the standard for motor grader control for years! 2D gives you the flexibility to use reference to work from: existing surface, a previous cut, curbstone or a string line. Features & Benefits
Images
Motor Grader 3D
We make sure the investment you make today will work for you in the future. Topcon’s building block design allows you to add new sensors or technologies to your system such as mmGPS and Networks as they become available without having to buy a whole new system. Features & Benefits
Images
Paving 2D
P-32Over a decade ago Topcon’s System Five set the standard for 2D Paving. Now Topcon is proud to offer its newest 2D paving system: P-32. The proven Sonic Tracker and Cross Slope sensor complete the P-32 system that will give you high quality results in any 2D paving application. With the new Features and Benefits
P-32+Topcon is proud to announce the new improvements to our 2D Paving product range. P-32 has been brought to a new level with the brand new ST-3 Sonic Tracker, new Re-designed Slope Sensor and updated the GC-35 with new Firmware 2.0. Features and Benefits
Images
Paving 3D
Step up from 2D control that relies on benching in stringlines for every lane of asphalt, into GNSS control, where you can go to any location on the site and start paving. Get superior control with greater speed and flexibility at the same time. Features & Benefits:
Images
PZS-1
The PZS-1 sensor instantly computes precise vertical information from the LZ-T5 laser transmitter. Using Lazer Zone technology, the PZS-1 automatically determines elevation based on jobsite control. Mounting the PZS-1 to a range pole and attaching a GPS+ receiver allows the sensor to receive the LZ-T5 laser signal and wirelessly transmit data to the receiver. Images
PZS-MC Sensor
The PZS-MC sensor replaces the machine-mounted GPS antenna. The PZS-MC sensor combines the MC-A1 GPS antenna with laser sensor technology into a total package. LazerZoneTM technology allows the sensor to detect up to four different LZ-T5 laser transmitters for increased range. The sensor attaches to a GPS vibration pole on the machine blade, and cables connect the receiver to the MC-R3 Receiver Box for sending corrections to the 9168 control box. Images
Topcon 3D Office
3D-Office allows you to create, edit, import/export, design and prepare files for any jobsite. You can export your files to the 3D-MC control box and Pocket 3D controller for immediate use in the field as well as importing them later on for further processing or volume calculations. 3D-Office is also used to remote connect to machines, send new job files or messaging with sitelink3D. Features & Benefits:
Images
Topcon Pocket 3D
Topcon’s powerful jobsite management tool made for contractors and the way they work. Topcon’s Pocket 3D Grade Management solution brings GPS down to earth. Features & Benefits
Images
Trencher 3D
Topcon’s 3D Trencher designed for digging trenches with the use of 3D technology. Eliminating the need to reference and check alignments by using GPS and TS-1 Tilt Sensors to control the blade the 3D Trencher makes digging trenches easy. Features & Benefits: Images
Wheel Loader
Magnet Enterprise
The heart of MAGNET Enterprise is a web browser environment that runs with individual windows or Widgets which allow complete configuration of how you like to work, so that you have what you need, where and when you need it. All it takes is a web browser to communicate, collaborate, and exchange data. Features & Benefits:
Images
MAGNET Field
Powerful and intuitive field application software that enables users to collect survey mapping data and perform construction and road layout using total stations, levels, and GPS. Features & Benefits
Images
Para-Level Dual Slope
Most Widely Used Precision Grader Three Dimensional Precision Grading Made Easy Over 50 Automatic Adjustments Per Second High Production Push-Pull Operation Made For Operator Comfort
FEATURES:
OPTIONS
Images
MAGNET Field Site
MAGNET Field Site is data collection software for construction measurement and layout activities. Features & Benefits
Images
Magnet Enterprise
The heart of MAGNET Enterprise is a web browser environment that runs with individual windows or Widgets which allow complete configuration of how you like to work, so that you have what you need, where and when you need it. All it takes is a web browser to communicate, collaborate, and exchange data. Features & Benefits:
Images
MAGNET Construction
Features & Benefits
*WiFi-only for iOS platforms OverviewMAGNET Construct is ready to drive your Topcon robotic total stations** and Layout Navigator instruments. This mobile app delivers precise design layout as well as quick and intuitive options for field measurements. It’s ideal for BYOD users seeking better jobsite layout productivity. As you move around the jobsite, just place the pole to quickly measure existing items and features. MAGNET Construct provides a streamlined layout workflow with graphic, real-time positioning to any point, line, or feature on your project site. Images
3DX33
Topcon’s X-33 system consists of two GPS antennas, four TS-i3 tilt sensors, the MC-i3 GPS receiver and Topcon’s GX-30 color, touch screen control box. The GX-30 allows the operator to “see” the exact position of the machine on site and the bucket position at all times. When detailed information is required you can select to visualize plan, profile or sectional view and use the dual grade indicators for elevation control. Features & Benefits:
Images
Compactor 2D
Spread and place material fast and accurately with Topcon’s laser indicate systems for compactors. Product options are available to meet every budget and job application. Features & Benefits
Images
Compactor 3D
Adding Topcon’s 3D-GPS+ system to a compactor greatly enhances productivity on a daily basis. Features & Benefits:
Images
Dozer – 3D-MC2
3D-MC2 is a new addition to the GPS+ system that allows a dozer to run and operate at high speed while maintaining smooth grade. Along with speed increases, 3D-MC2 means fewer passes resulting in much more work done in less time. Less time equals less fuel and less machine wear. Features & Benefits
Images
Dozer – 3D-MCMAX
Topcon’s premier integrated dozing system, 3D-MCMAX delivers the highest quality solution for any rough or fine grading application. Features & Benefits
Images
Dozer 2D
Topcon’s System Five gives you the advanced automatic machine control technology needed for a competitive edge in today’s market. System Five is available in either a single hydraulic function or dual hydraulic function platform. The Single System Five control box controls your dozer’s elevation lift cylinders, while the Dual System Five control box controls both the elevation and slope cylinders. You can customize System Five with Topcon’s complete line of optional equipment including laser receivers, sonic control, and slope sensors for a variety of application needs. System Five features an easy-to-use interface for superior machine control with less effort, and increased accuracy and performance for higher productivity and better control of costly materials. For contractors seeking a competitive edge, look no further than Topcon’s System Five! Features & Benefits:
Images
Dozer 3D
For road building, site work, contour grading, or any other complex surface grading requirements, Topcon’s 3D-GPS+ will put more money to your bottom line – where it counts. Features & Benefits:
Images
FC 500
The new Topcon FC-500 data controller is designed for the construction professional operating the Topcon MAGNET™ Field, Site, and Layout, software as well as Topcon’s Pocket 3D. The controller works with all of Topcon’s GPS receivers and total stations. This handheld computer meets and exceeds all field applications. The FC-500 has an optional 3.5G cell modem that provides access to MAGNET Enterprise for sending and receiving data files Large sunlight readable display – 4.3 inch Images
FC 5000
Rugged hand-held field computer ideal for MAGNET Field and Pocket 3D data collection software. ..and more! Features and Benefits
Expanded Features
Images
GT Robot
The GT series of robotic total stations are a trimmed down, high-performance solution that’s ready to impress today, yet still grow with you into tomorrow. You get the efficiency of a single-operator robotic system, the power of long range reflectorless measurements, and the ability to perform as a hybrid positioning solution. All in a compact system that’s a third smaller and twice as fast. UltraSonic technology is the driving force for the GT Series. You can see and hear the difference immediately. The UltraSonic motors are the fastest available in the market – at 180 degrees per second it’s the smoothest and most accurate prism-tracking available.
Images
Haul Truck HT-30
Haul Truck Assignment And Tracking System Features:
Benefits:
Images
HiPer HR
Hybrid GNSS ReceiverEvery job site is different. Every project has unique geographic conditions. Each day brings new hurdles to overcome. Topcon’s HiPer HR has everything you need in an integrated GNSS receiver in order to get your job done. Features & Benefits
Images
HiPer SR
Providing leading edge technology in a smart, rugged design, the new HiPer SR with optional Cellular configuration adds possibilities to your job site. With an integrated cellular modem, the new HiPer SR becomes an extended GNSS range site receiver and can be used in a variety of setup including MAGNET Relay, Network, and LongLinkTM. While bringing flexibility, the HiPer SR Cellular configuration still provides superior performance at an affordable price. Features & Benefits
Images
HiPer VR
The HiPer VR is a complete solution and versatile in many ways. It can be used for static or kinematic GNSS post-processed surveys, as a network RTK rover with the FC-5000’s internal 4G/LTE cellular modem, as a UHF/FH/Longlink jobsite RTK rover, and also in Topcon’s patented Hybrid Positioning workflow. Top features include:
Images
Intelligent Compaction Rollers
Our system kits include a temperature and stiffness sensor for HMA and soil jobs making the C-63 fully compliant with the definition of “Intelligent Compaction” as set forth by the US Federal Highway Administration. Combining the new sensor packages with the pass count tracking capability, compaction has become more efficient than ever. At the same time, the updated C-63 system drastically improves the quality of compaction and jobs can be completed up to 30% faster. In asphalt paving, it is very likely there are multiple rollers working together when compacting a road or parking lot. For accurate compaction, it is crucial for each operator to be able to see not only their passes, but those made by other machines. The real-time connection with our Sitelink3D Enterprise module allows this to happen, ensuring under or over compaction is now a thing of the past. It is not often that quality and efficiency go hand in hand, but with the new C-63 system you will see this is exactly what happens on a compaction project. Work will be completed sooner and contractors will achieve optimal pass counts every time. Benefits• Leveraging multiple integrated temperature sensors, each compactor achieves consistent results through constant feedback into the system. • Ruggedized GNSS technology provides accurate pass counts, geographic locations of each run, as well as georeferenced task assignments and completion. • State of the art accelerometer that performs in all conditions to deliver confident surface stiffness values that ensure you are achieving regulatory intelligent compaction standards. • Connectivity to our Sitelink3D Enterprise service promotes each machine to then take advantage of 24/7 access to project data, team collaboration, custom reporting, as well as standard export to Veta analysis software. Images
LZ-T5
Enhance your GNSS positional accuracy with the latest in laser engineering. The LZ-T5 performs in a variety of working environments, including the most challenging job-site conditions. Ideal for any task, the LZ-T5 can function as a single Millimeter GPS solution for paving, grading and grade checking operations.
Images
GB108 Grader Blade
High Precision with a Grader Blade The Level Best Precision Grader Blade Comes 3D Ready Use Equipment You Already Have Power To Move Material With Precision Peels Sod and Topsoil For Reuse FEATURES
SPECIFICATIONS Moldboard Width 108″ Width Fully Angled 97.5″ Length 99.88″ Width 108″ Height 60″ Cylinders 5 Blade Height 16.88″ Max. Blade Lift 7.29″ Max. Blade Cut 7.73″ Hydraulic Valve Type 4-Spool Proportional Hydraulic Blade Side Shift (Left or Right) /-13″ (+/- 330mm) Moldboard Angle (Left or Right) +/- 30 degrees Cutting Edge Size – 5/8″ x 6″ Bolt-on, Reversible Double-Beveled Curved (16mm x 152mm) Operating Weight – 2,508 lbs.
Images
Machine Control |
